Details
Brand
TSProf
Compatible Sharpeners
TSPROF K03
TSPROF K03 PRO
TSPROF Kadet
TSPROF Kadet PRO
TSPROF Pioneer
Toohr3
Set Composition:
2 items
Description

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum sharpening angles of less than 7.5° per side.

The clamps are supplied with two types of screws:

— Shortened, designed for sharpening thin knives, at minimal angles;

— Standard, designed for knives with a spine thickness of up to 3.5mm.

The clamps are made of a single piece of aircraft-grade aluminum, allow you to adjust the clamp to any shape of the blade and ensure the symmetry of the installation. Thanks to the two gripping points, the deflection of the blade is impossible. It is possible to independently move the clamps along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels" along the line of bevels.

Recommended blade length: 30-200mm
Jaws tips thickness: 1mm
Clamp width: 20mm, 2 pc.
Gap between jaws in free state: 4mm
Maximum spine thickness of a knife: 3.5mm
Size for a wrench: HEX4 hexagon 4.0mm
Wrench: included

Customer Reviews

Customer Reviews

Overall rating: 5.0 / 5 from 8 reviews.

These work well for what they were intended for. They work great for knives with smaller blades where you have to clamp closer to the edge.

Kadet Whole Milled Fillet Clamps

Customer photo review of Whole Milled Fillet Clamps for TSProf Kadet (Set of 2)

I purchased the Kadet fillet clamps because the ones for the K03 were sold out. Well my luck, 2 days after I ordered them the fillet clamps for the K03 came back in stock. I thought about returning the ones for the Kadet, but changed my mind. I feel that with the TSPROF L brackets the clamps for the Kadet will be overall more versatile. Without the L bracket, the Kadet clamp sits back 3/4" from the K03 whole milled clamp, and with the bracked it is dead even with it. So just thinking about it, when just using the fillet clamps I have 3/4" fwd and back movement whenever needed. Gritomatic also sells other adapters that are cheaper then the K03/Kadet L brackets (which I also have the Printsharp adapter for center clamping). But I am very happy that I went with the Kadet fillet clamps.

Whole Milled Fillet Clamps for TSProf Kadet (Set of 2)

Questions and Answers