{"title":"🔬Control Tools","description":"","products":[{"product_id":"digital-angle-gauge","title":"Digital Angle Gauge","description":"\u003cp\u003eIt's very important to keep a sharpening angle consistent on a guided knife sharpener. The angle should not change when replacing one sharpening stones to another. In order to control the sharpening angle, one measures the angle between the knife plane and the sharpening stone.\u003c\/p\u003e\u003cp\u003eThere are many similar digital angle gauges on the market. This model is very light, which is a huge advantage when using with conjunction with a knife sharpener.\u003c\/p\u003e","brand":"Gritomatic","offers":[{"title":"Default Title","offer_id":34121910542,"sku":"ANGLEGAUGE2","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/digital-angle-gauge.jpg?v=1764726730"},{"product_id":"25-mm-loupe-with-led","title":"25-mm Loupe with LED","description":"\u003cp\u003e\u003cstrong\u003eTriplet Loupe\u003c\/strong\u003e is the simplest tool of optic control of knife sharpening. A loupe gives the ability to identify and correct sharpening mistakes in real-time. LED lighting makes the work very comfortable. Lens diameter - 25 mm. Real magnification - approximately 10x (40x according to the product passport). \u003c\/p\u003e","brand":"Nanynag Srate","offers":[{"title":"Default Title","offer_id":31898250444909,"sku":"TRIPLET-40X-25MM","price":5.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/25-mm-loupe-with-led.jpg?v=1763721843"},{"product_id":"laser-knife-edge-goniometer","title":"Laser Edge Goniometer Lite","description":"\u003cp\u003e\u003cstrong\u003eLaser Goniometer\u003c\/strong\u003e is a tool of measurement of the sharpening angle of knives and scissors. It's the price-wise alternative of expensive equipment invented by CATRA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoniometer Lite \u003c\/strong\u003eis an incredibly simple, but sufficiently informative device. It utilizes a built-in laser source powered by one CR2032 battery. You can test knives up to 2\" wide. The grind can be symmetric, asymmetric, multi beveled, or convexed. The maximum full angle 80 degrees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAttention!\u003c\/strong\u003e There is \u003cem\u003eno User's Guide\u003c\/em\u003e.\u003c\/p\u003e\u003cp\u003eTo measure the angle for sharpening scissors, you need to place one half of the scissors to the edge of the center angle and move the stop to the angle. Read the data on the laser scale and add 45 degrees.\u003c\/p\u003e\u003ch4\u003eModels Comparison\u003c\/h4\u003e\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"four columns\"\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003eLite\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -36°...+36°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 1.7 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 49 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋CR2032 battery\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🖐Manual\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"four columns\"\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003ePro\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -28°...+28°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 2.7 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 80 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋CR2032 battery\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🖐Manual\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"four columns\"\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003eMaster\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -44°...+44°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 1.8 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 51 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋Built-in battery with micro USB\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🧲Magnets-assisted\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cimg data-sanitized-data-identifyelement=\"2\" data-identifyelement=\"2\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/Goniometer_a4ba02cf-2495-47bd-84f9-891e410cec50.jpg?v=1606450723\"\u003e\u003c\/p\u003e\u003cp\u003eThe photo shows an example of measuring the angle of an OLFA carton cutter described above. Unfortunately, the photo does not exactly match the original, because photographing a laser beam is fairly difficult - the flash distorts it. In reality, it is much clearer and more informative. However, even here you can see not only the basic sharpening angle (bevel towards the cutting edge) but also the secondary bevel, even though it is only 0.12 mm wide (measured using a measuring microscope).\u003c\/p\u003e","brand":"Gritomatic","offers":[{"title":"Default Title","offer_id":31918855028845,"sku":"GONIOMETER-LITE","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/laser-knife-edge-goniometer.jpg?v=1763722943"},{"product_id":"laser-edge-goniometer-master","title":"Laser Edge Goniometer Master","description":"\u003cp\u003e\u003cstrong\u003eLaser Goniometer\u003c\/strong\u003e is a tool of measurement of the sharpening angle of knives and scissors. It's the price-wise alternative of expensive equipment invented by CATRA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser Goniometer Master\u003c\/strong\u003e version is more advanced than Lite and Pro versions. Master version has a blade fixation by magnets. This allows you to study the geometry of the knife in peace and quiet. Two strong magnets allow you to hold the knife inside the goniometer or the goniometer itself with the knife.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLaser Goniometer Master PLUS\u003c\/strong\u003e includes a Laser Goniometer Master and a carry case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew revision.\u003c\/strong\u003e The laser is powered by a built-in battery that can be charged via micro USB.\u003c\/p\u003e\u003ch4\u003eModels Comparison\u003c\/h4\u003e\u003cp class=\"container\"\u003e\u003c\/p\u003e\u003cp class=\"four columns\"\u003e\u003c\/p\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003eLite\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -36°...+36°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 1.7 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 49 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋CR2032 battery\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🖐Manual\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp class=\"four columns\"\u003e\u003c\/p\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003ePro\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -28°...+28°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 2.7 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 80 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋CR2032 battery\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🖐Manual\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp class=\"four columns\"\u003e\u003c\/p\u003e\u003ctable class=\"responsive-table\"\u003e \u003cthead\u003e\u003ctr\u003e\u003cth\u003eMaster\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e📐Scale range: -44°...+44°\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e📏Scale resolution: 1° = 1.8 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔪Blade capacity: 51 mm\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🔋Built-in battery with micro USB\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e🧲Magnets-assisted\u003cbr\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eUnlike the Pro version, Master has two settings: The first one is the possibility to move the knife horizontally by means of an adjustment screw, which allows a precise adjustment to the laser beam regardless of the thickness and geometry of the knife blade. The second adjustment is to align the goniometer scale exactly to the center of the cutting edge of the knife to obtain an exact symmetrical pattern. You can view the readings at rest, as it is not necessary to \"readjust\" the blade position repeatedly to obtain a symmetrical image on the scale. The horizontal displacement range of the blade is 10 mm. The turning range of the scale is 12 degrees. This is more than enough for any blade geometry and any reasonable thickness.\u003c\/p\u003e\u003cp\u003eTwo polyamide bushings with a diameter of 6 mm are used to fix the blade vertically. They prevent damage during sharpening when touching and levelling and can be easily replaced with pieces of 6x4 polyamide or 10mm polyurethane tubing if necessary. The horizontal movement of the blade is carried out on two guides with an M6 running screw, the bearings MR106ZZ make the movement of the blade easy and reliable. The scale of the goniometer is located on a rotary disk, in the middle of the axis of rotation where the blade is located. The rotation of the scale is done by hand, through the serrated elements on three sides of the goniometer housing. To protect the blade from scratches, it is recommended to put pieces of adhesive tape or masking tape on the magnets before measuring. Please do not use too large pieces as the laser beam should not be obstructed.\u003c\/p\u003e\u003cp\u003eA professional laser module with a glass lens was used for this protractor, which was pre-sorted and adjusted. Two ISO7380 screws M4x10 fix the rotary laser unit to fine tune the spot to \"0\". The operation is very easy and will give you accurate and helpful results at any time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAttention!\u003c\/strong\u003e There is \u003cem\u003eno User's Guide\u003c\/em\u003e.\u003c\/p\u003e\u003ch4\u003eDemo\u003c\/h4\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/9ZZKuGRnlkk\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e","brand":"Gritomatic","offers":[{"title":"Master","offer_id":39468689195117,"sku":"GONIOMETER-MASTER","price":260.0,"currency_code":"USD","in_stock":false},{"title":"Master Plus","offer_id":43466258776173,"sku":"GONIOMETER-MASTERPLUS","price":245.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/laser-edge-goniometer-master.jpg?v=1763726014"},{"product_id":"waterproof-glgc-grand-logarithmic-grit-chart","title":"Waterproof Grand Logarithmic Grit Chart [11\" x 8.5\"]","description":"\u003cp\u003eAbrasives in Micron Scale: Grand Logarithmic Grit Chart (version rv.13) printed in A4 size (11 x 8.5\") on cardstock paper with UV coating. Copyright \"Mr.Wizard\".\u003c\/p\u003e\u003cp\u003e\u003cem\u003eIt is the intent to display a broad range of abrasive particle size information as compactly and intelligibly as possible.  Since these cover several orders of magnitude a logarithmic scale is most appropriate.  A logarithmic scale also has the property of equidistant spacing for any geometric progression, meaning that a theoretically ideal abrasive series will be uniformly spaced in the chart.  Stated another way, two grits that differ by a specific ratio will be a fixed distance apart on the vertical axis of the chart whether they are 1.0 and 1.5 micron or 200 and 300 micron.\u003cbr\u003e\u003cbr\u003eThe chart started out as a table of conversions from grit number to microns but grew in scope to include products that are directly specified in microns.  It is therefore also to a degree a record of availability of products that may be of interest in certain markets.  The logarithmic visual representation is intended to be easier to internalize than numbers simply read from a list.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eMore info in the official \u003ca href=\"http:\/\/myplace.frontier.com\/~mr.wizard\/GLGC\/README.txt\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eREADME\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gritomatic","offers":[{"title":"Default Title","offer_id":39613636575341,"sku":"GLGC-A4","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/waterproof-glgc-grand-logarithmic-grit-chart.jpg?v=1763725012"},{"product_id":"axicube-one-sharpening-angle-finder-rev-2","title":"Axicube One Sharpening Angle Finder","description":"\u003cp\u003e\u003cstrong\u003eThe Axicube One Sharpening Angle Finder (Rev 2)\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e is designed for high-precision measurement of \u003cstrong\u003eangles between planes \u003c\/strong\u003eand the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of inclination relative to the gravity vector.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eMEMS design \u003c\/strong\u003e(Micro Electro Mechanical System) with ultra-precise electronic sensors of inclination relative to the gravity vector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompact aluminum shell\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN38 class neodymium magnets \u003c\/strong\u003eon the bottom, lateral, and rear sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery\u003c\/strong\u003e chargeable via the Micro-USB connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecification\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAngle measurement range: 0 – 99.9°\u003c\/li\u003e\n\u003cli\u003eMeasurement accuracy: 0.1°\u003c\/li\u003e\n\u003cli\u003eMeasurement error: 0.05°\u003c\/li\u003e\n\u003cli\u003eBattery Capacity: 300mAh\u003c\/li\u003e\n\u003cli\u003eCharging time: 3-5 hours\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto power-off: 5 minutes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 18.3 x 30.6 x 45.8 mm.\u003c\/li\u003e\n\u003cli\u003eWeight: 60 grams\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight with packaging: 140 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKit\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAxicube One Electronic Angle Finder\u003c\/li\u003e\n\u003cli\u003eMicro USB cable\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHow to use Axicube One\u003c\/h4\u003e\u003ch4\u003eGeneral Information\u003c\/h4\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/Axicube_Scheme.png?v=1687035372\" width=\"50%\"\u003e\u003cp\u003e\u003cspan class=\"lcdyell\"\u003e1\u003c\/span\u003e Power button\u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e | \u003cspan class=\"lcdyell\"\u003e2\u003c\/span\u003e Reset button\u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e | \u003cspan class=\"lcdyell\"\u003e3\u003c\/span\u003e Display | \u003cspan class=\"lcdyell\"\u003e4\u003c\/span\u003e Divider | \u003cspan class=\"lcdyell\"\u003e5\u003c\/span\u003e Micro-USB | \u003cspan class=\"lcdyell\"\u003eA\u003c\/span\u003e \u003cspan class=\"lcdyell\"\u003e\u003cp\u003eAxicube will go sleep after 5 minutes of inactivity. Press \u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e once to turn it on. To turn it off, hold \u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e for 3 sec.\u003c\/p\u003e\n\u003cp\u003eTo check the battery charge level and the current mode, press \u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e when Axicube is on. \u003cspan class=\"lcd\"\u003e85:P2\u003c\/span\u003e - charge level 85%, P2 mode.\u003c\/p\u003e\n\u003cp\u003eTo cycle operating modes, press \u003cspan class=\"axi-on\"\u003e\u003c\/span\u003e and \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e at the same time.\u003c\/p\u003e\n\u003cp\u003eDo not let the battery level drop to 0% level. The battery level below 10% is critical - the Axicube must be immediately charged. The full charging time is 3-5 hours.\u003c\/p\u003e\n\u003ch4\u003eAxicube One Modes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"lcdmode\"\u003eP1\u003c\/span\u003e - \u003cstrong\u003eInclinometer Mode\u003c\/strong\u003e for measuring the angle of inclination from horizontal level\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"lcdmode\"\u003eP2\u003c\/span\u003e - \u003cstrong\u003eUniversal Mode\u003c\/strong\u003e (Kadet\/Blitz mode) dual-purpose: 1) for setting the sharpening angle on Kadet and Blitz systems, and 2) for \u003cspan class=\"green-txt\"\u003emeasuring the sharpening angle\u003c\/span\u003e on a wide range of sharpening systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"lcdmode\"\u003eP3\u003c\/span\u003e - \u003cstrong\u003eK03 Mode\u003c\/strong\u003e for \u003cspan class=\"green-txt\"\u003emeasuring the sharpening angle\u003c\/span\u003e on sharpening systems with horizontally leveled knife\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"lcdmode\"\u003eP4\u003c\/span\u003e - \u003cstrong\u003eAngle Gauge Mode\u003c\/strong\u003e for setting sharpening angle at the beginning of sharpening session\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cspan class=\"lcdmode\"\u003eP1\u003c\/span\u003e Inclinometer Mode\u003c\/h4\u003e\n\u003cp\u003e\u003cspan class=\"lcd\"\u003e00:00\u003c\/span\u003e The inclinometer mode is designed to measure the angle of inclination relative to the horizontal level.\u003c\/p\u003e\n\u003cp\u003e🎛️\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace Axicube on a flat surface.\u003c\/li\u003e\n\u003cli\u003ePress and hold \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e for 15 s. The display will start flashing.\u003c\/li\u003e\n\u003cli\u003eRelease \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. The display will show \u003cspan class=\"lcdyell\"\u003eP1\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace Axicube against a stationary point, such as a wall.\u003c\/li\u003e\n\u003cli\u003ePress \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. The display will show \u003cspan class=\"lcdyell\"\u003eP2\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eTurn Axicube 180°. Press \u003cspan class=\"redtext\"\u003e⊙\u003c\/span\u003e one more time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cspan class=\"lcdmode\"\u003eP2\u003c\/span\u003e Universal Mode with Kadet and Blitz\u003c\/h4\u003e\n\u003cp\u003e\u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e Universal mode is designed for sharpening systems other than TSPROF K03. On Kadet and Blitz series, setting the sharpening angle and \u003cspan class=\"green-txt\"\u003emeasuring the sharpening angle\u003c\/span\u003e are executed in different ways.\u003c\/p\u003e\n\u003cp\u003e🎚️\u003cstrong\u003eSetting the sharpening angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your system ready for a sharpening session. Put the guide rod with a sharpening stone facing down on top of the clamped knife.\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube side A on the stone holder.\u003c\/li\u003e\n\u003cli\u003eReset to zero. \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e#.##\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube side A on the angle finder stand.\u003c\/li\u003e\n\u003cli\u003eSet a desired sharpening angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e📐\u003cstrong\u003e\u003cspan class=\"green-txt\"\u003eMeasuring the sharpening angle\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the Axicube side A on the angle gauge holder.\u003c\/li\u003e\n\u003cli\u003eReset to zero. \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e#.##\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube side A on the abrasive holder.\u003c\/li\u003e\n\u003cli\u003eAxicube will correctly measure a sharpening angle at any point of the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cspan class=\"lcdmode\"\u003eP2\u003c\/span\u003e Universal Mode with non-TSPROF systems\u003c\/h4\u003e\n\u003cp\u003e\u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e Universal mode is designed for sharpening systems other than TSPROF K03.\u003c\/p\u003e\n\u003cp\u003e🎚️\u003cstrong\u003eSetting the sharpening angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake your system ready for a sharpening session. Put the guide rod with a sharpening stone facing down on top of the clamped knife.\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube on the zero level. Use the same side of Axicube for leveling and measuring.\u003c\/li\u003e\n\u003cli\u003eReset to zero. Press \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e#.##\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube on the stone holder.\u003c\/li\u003e\n\u003cli\u003eSet a desired sharpening angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e📐\u003cstrong\u003e\u003cspan class=\"green-txt\"\u003eMeasuring the sharpening angle\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the Axicube on the zero level. Use the same side of Axicube for leveling and measuring.\u003c\/li\u003e\n\u003cli\u003eReset to zero. Press \u003cspan class=\"axi-0\"\u003e\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e#.##\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube on the stone holder.\u003c\/li\u003e\n\u003cli\u003eAxicube will correctly measure a sharpening angle at any point of the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cspan class=\"lcdmode\"\u003eP3\u003c\/span\u003e K03 Mode\u003c\/h4\u003e\n\u003cp\u003e\u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e K03 mode is designed for K03 family but will work with any sharpening systems with horizontally leveled knife. \u003cspan class=\"lcdyell\"\u003eP3\u003c\/span\u003e mode is demanding but rewarding.\u003c\/p\u003e\n\u003cp\u003e📐\u003cstrong\u003e\u003cspan class=\"green-txt\"\u003eMeasuring the sharpening angle\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the Axicube on the zero level. Use the same side of Axicube for leveling and measuring.\u003c\/li\u003e\n\u003cli\u003eReset to zero. Press \u003cspan class=\"redtext\"\u003e⊙\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e#.##\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e0:00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"lcd\"\u003eERR9\u003c\/span\u003e occurs in \u003cspan class=\"lcdyell\"\u003eP3\u003c\/span\u003e mode when you try to zero reset not in the horizontal level.\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube on the stone holder.\u003c\/li\u003e\n\u003cli\u003eAxicube will correctly measure a sharpening angle at any point of the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cspan class=\"lcdmode\"\u003eP4\u003c\/span\u003e Angle Gauge Mode\u003c\/h4\u003e\n\u003cp\u003e\u003cspan class=\"lcd\"\u003e000:0\u003c\/span\u003e Angle Gauge mode mimics traditional angle cubes. Designed for domestic repair, construction and equipment adjustment.\u003c\/p\u003e\n\u003cp\u003e📐\u003cstrong\u003eFinding the angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace Axicube side A on the first surface.\u003c\/li\u003e\n\u003cli\u003eReset to zero. Press \u003cspan class=\"redtext\"\u003e⊙\u003c\/span\u003e. \u003cspan class=\"lcd\"\u003e###.#\u003c\/span\u003e → \u003cspan class=\"lcd\"\u003e000:0\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlace the Axicube side A on the second surface.\u003c\/li\u003e\n\u003cli\u003eAxicube will correctly measure a sharpening angle at any point of the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eVideos\u003c\/h4\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KPXkQNcflPI\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dV6yNHLFxYw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"TSProf","offers":[{"title":"Default Title","offer_id":40660936261741,"sku":"TSPROF-AXICUBE-ONE","price":116.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/axicube-one-angle-finder.jpg?v=1763723058"},{"product_id":"laser-edge-goniometer-master-50","title":"Laser Edge Goniometer MASTER-50","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTER-50\/MASTER-90 laser goniometer\u003c\/strong\u003e is an upgraded version of the previous MASTER model, featuring a redesigned appearance and enhanced structural solutions. In the new version, the laser and power board are integrated into a single rigid ring structure, eliminating the need for wired connections.\n\u003c\/p\u003e\n\u003cp\u003e\n    The key feature of the new version is the \u003cstrong\u003einterchangeable scales\u003c\/strong\u003e, which allow for the measurement of blades with varying widths. The MASTER-50 and MASTER-90 models share a \u003cstrong\u003ecommon base platform\u003c\/strong\u003e, ensuring functional similarity.\n\u003c\/p\u003e\n\u003cp\u003e\n    The number in the model name indicates the \u003cstrong\u003emaximum blade width\u003c\/strong\u003e: 54 mm for the MASTER-50 and 87 mm for the MASTER-90. If you purchase the MASTER-50 model but later need to measure wider blades, there is no need to buy a new goniometer. Simply acquire the appropriate scale and replace it yourself. This process is very straightforward: the scale is secured with two M3 screws and fits perfectly into place thanks to guiding elements.\n\u003c\/p\u003e\n\u003cp\u003e\n    This design makes it possible to manufacture \u003cstrong\u003evirtually any scale\u003c\/strong\u003e to meet specific requirements, making the goniometer a versatile tool for a wide range of applications.\n\u003c\/p\u003e","brand":"Gritomatic","offers":[{"title":"Default Title","offer_id":41952064077933,"sku":"GONIOMETER-MASTER-50-R","price":245.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/Laser_20Goniometer_20MASTER-50_20_28Right_20Hand_29.jpg?v=1763724620"},{"product_id":"axicube-t2-electronic-angle-finder","title":"Axicube T2 Electronic Angle Finder","description":"\u003cp\u003e\u003cstrong\u003eAxicube T2 Electronic Angle Finder\u003c\/strong\u003e is the upgraded version of the Axicube One. The new model features a removable lithium polymer battery and a modern USB Type-C charging port for enhanced convenience and performance. Designed for fast and accurate measurements, the Axicube T2 helps you achieve the correct sharpening angle with ease. It is an essential tool for any professional or DIY knife sharpening system setup.\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":42379349164141,"sku":"TSPROF-AXICUBE-T2","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/5900\/files\/Axicube_20T2_20Electronic_20Angle_20Finder_201.jpg?v=1763720398"}],"url":"https:\/\/de.gritomatic.com\/en\/collections\/control-tools.oembed","provider":"Gritomatic","version":"1.0","type":"link"}